2012版恒诚网站 | English | Set for home page | Favorites site
Laboratory Wet Strong-intensity Magnetic Separator
Refresh time:2011/7/27   Browse number:

 It is applicable in scientific research, teaching and comprehensive utilization and assessment of mineral resources and for separation of hematite. Iron content for the tested samples can be obtained merely with minor test samples. The product is produced by the only enterprise designated by the former Ministry of Geology and Mineral Resources, in compliance with the Industrial standards.
It is provided for labs of metallurgical, geological, building material, light and other industries to carry out separation tests of moderate and weak-intensity magnetic minerals and also for the relevant factories and mines to check and control production and technical indexes, improving technological process.
It can automatically reset at the initial stage under the control by PLC, i.e. feeding valve being in the close state and ore separating hopper in the position of tailings. The excessive process delay is made at 3S to avoid mutual blending of samples, namely the ore separating bucket delaying 3S in the process of actions of tailings, middlings and concentrates .The separation operation process is that ore slurry in mixing tank is directed through feeding valve and flat nozzle into separating tank ; non-magnetic minerals with the action of gravity drop into tailing tank along the gaps of gear rack; magnetic mineral particles with the action of magnetic field are absorbed on the gear racks;the ore separating hopper after feeding swings to the upper middlings tank; the middlings flush open solenoid valve ( flowrate can adjust the middling flushing gate valve);non-magnetic minerals particles entrained in the ore separating tank are flushed  before the ore separating hopper swings to the upper concentrate tank and meanwhile de-energize magnetizing power supply; after magnetic fields of the separation tank disappear, the flushing solenoid valve opens and flushes the magnetic mineral particles absorbed on the gear rack into the concentrate tank ( flush volume to be controlled by the concentrate gate valve).After completion of one cycle of separation operation, PLC makes reset to the next cycle for achieving the objective of separation of magnetic from non-magnetic minerals. 
Technical Parameters 

Model 单位Uite XCSQ50×70
Size of separating tank mm 50×70×220
Range of magnetic field intensity control GS 0~23000(1840KA/m)
Excitation power supply Input(single-phase A.C.)   220V,50HZ
Output(D.C.)   0~118V,1~ 25A
Coil cooling method   Forced air cooling
Max, feed size mm 1
Handling capacity kg/h 4~5
Overall consumed power kw ≤4
Outside dimension mm 840×550×1415
Weight kg 795

 

赣州网站建设赣州太极拳赣州网站制作赣州网站优化赣州网络公司赣州网站设计赣州网页设计赣州网页制作赣州做网站赣州微信公众号赣州太极拳培训赣州太极拳教学赣州太极拳健身赣州陈式太极拳培训赣州太极拳健身队赣州太极拳表演队生活百科网追逐生活百科网
Hengcheng Mining Equipment Machinery Factory All rights reserved

Add: industrial area in shicheng county,ganzhou city,Jiangxi province, china  post code: 342700
Contact: Mr Wen  015879720520  fax:86-797-5710595  QQ: 47776359
Post box:shakingtable@hotmail.com  web site:http://www.oreshaker.comRSS/XML